When does hit the floor come back on 2019?

Welcome to the MM Garage Door Repair Utah blog! As your trusted local garage door experts, we’re dedicated to providing you with the information you need to keep your garage door operating smoothly and safely. Today, we’re tackling a question we often hear from homeowners, particularly those with older garage door systems: “When does the hit the floor come back on 2019?” While the phrasing might be a bit unclear, we understand the underlying concern – why isn’t your garage door closing completely and consistently?

Understanding the Issue: Garage Door Not Closing Fully

The phrase “hit the floor come back on 2019” likely refers to a common problem where the garage door appears to close, but then immediately reverses direction and opens again. This issue can be frustrating and concerning, as it compromises the security of your garage and home. While the specific year 2019 might be mentioned due to when the problem first started, the underlying causes are relevant regardless of the year.

Several factors can contribute to this behavior. Let’s explore some of the most common culprits:

Safety Sensor Issues

One of the most frequent reasons for a garage door reversing upon closing is a problem with the safety sensors. These sensors, located near the floor on either side of the garage door opening, are designed to detect obstructions in the door’s path. If the sensors are misaligned, dirty, or malfunctioning, they may falsely detect an obstacle, causing the door to reverse.

Troubleshooting Steps:

1. Check Alignment: Ensure the sensors are facing each other and properly aligned. Many sensors have indicator lights that will illuminate when aligned correctly. If the lights are off or blinking, gently adjust the sensors until they are aligned.
2. Clean the Lenses: Dust, dirt, and debris can accumulate on the sensor lenses, interfering with their ability to function properly. Use a soft, dry cloth to clean the lenses.
3. Inspect Wiring: Examine the wiring connected to the sensors for any signs of damage, such as fraying or disconnection. If you find any damaged wiring, it’s best to contact a professional for repair.

Obstructions in the Door’s Path

Even if the safety sensors are functioning correctly, an actual obstruction in the door’s path can trigger the reversal mechanism. This could be anything from a small object like a toy or tool to a build-up of snow or ice.

Troubleshooting Steps:

1. Visually Inspect the Path: Carefully examine the entire area beneath the garage door for any obstructions. Remove any objects that may be interfering with the door’s closing.
2. Check the Tracks: Inspect the garage door tracks for any debris or obstructions that could be preventing the door from moving smoothly.

Limit Switch Adjustments

The limit switches on your garage door opener control how far the door travels when opening and closing. If the down limit switch is set incorrectly, the door may not close completely before reversing. This is less common but can still occur.

Troubleshooting Steps:

1. Locate the Limit Switches: The limit switches are typically located on the garage door opener motor unit. Consult your owner’s manual for the exact location.
2. Adjust the Down Limit Switch: Use a screwdriver to carefully adjust the down limit switch. Make small adjustments and test the door after each adjustment. Be careful not to overtighten the switch.

Spring Tension Issues

While less directly related to the reversal issue, incorrect spring tension can sometimes contribute to the problem. If the springs are too tight or too loose, the door may not move smoothly, potentially triggering the safety sensors.

Important Safety Note: Garage door springs are under high tension and can be dangerous to work with. We strongly recommend that you do not attempt to adjust or repair garage door springs yourself. Contact a qualified technician for assistance.

Final Solution

After systematically checking the safety sensors, clearing any obstructions, and verifying the limit switch settings, you should be able to resolve the issue of your garage door reversing upon closing. If you’ve tried these steps and the problem persists, it’s time to call in the professionals at MM Garage Door Repair Utah.

FAQs

Q: How often should I clean my garage door safety sensors?

A: We recommend cleaning your safety sensors at least twice a year, or more frequently if you live in a dusty or dirty environment.

Q: Can I replace my garage door safety sensors myself?

A: Yes, you can replace the sensors yourself, but it’s important to follow the manufacturer’s instructions carefully. If you’re not comfortable working with electrical wiring, it’s best to call a professional.

Q: My garage door opener is making a lot of noise. Is this related to the door not closing properly?

A: It’s possible. Unusual noises can indicate a problem with the garage door opener mechanism, which could indirectly affect the door’s ability to close properly. It’s a good idea to have a technician inspect the opener.

Conclusion

A garage door that won’t close completely can be a major inconvenience and security risk. By understanding the potential causes and following the troubleshooting steps outlined above, you can often resolve the issue yourself. However, if you’re unsure about any aspect of the repair process, or if the problem persists, don’t hesitate to contact the experts at MM Garage Door Repair Utah. We’re here to provide you with fast, reliable, and affordable garage door services.

Ready to get your garage door working perfectly again? Don’t let a faulty garage door compromise your home’s security. Call MM Garage Door Repair Utah today at 801-418-9217 for a free consultation and expert service. Or, visit our website at mmgaragedoorrepair.com to schedule an appointment online. Let us take the weight off your shoulders – and the door off your mind!